36 in Mushroom Gray Resin-Top Vanity - Two Drawers, One Cast Top
914 mm wide, 559 mm deep, and the bowl is molded into the top instead of dropped into it.
Most 36 in replacement vanities in US multifamily work are a board box with a cultured-marble top screwed on, and the spec fails in the same two places: the top cracks at the rim and the board swells under it. RB914 moves both. The cabinet is a 16 mm MFC carcass with 18 mm MDF fronts in mushroom gray, faced on both sides, on two full-extension soft-close drawers rated 25 kg. The top is a one-piece matte white cast-resin slab with a 480 x 330 mm bowl molded in, so there is no rim joint to re-caulk on turnover. Two cartons per set at 0.321 m3, and 210 sets load a 40HQ.
- ModelFAME-RB-914MG (RB914 series)
- Overall size914 W x 559 D x 876 H mm (36 x 22 x 34.5 in), floor-standing
- Carcass16 mm MFC, E1 to EN 717-1 and TSCA Title VI (40 CFR 770), melamine-faced both sides
- Fronts18 mm MDF core, mushroom gray super-matte melamine at 4 gloss units, recessed 120 mm aluminum finger pull, no drilled handle holes
- Edgebanding1 mm ABS on all four edges, PUR glue line
- Drawers2 full-extension undermount, soft-close, 25 kg rated, 40,000-cycle tested
Trade inquiry only — this is a B2B catalog with no online checkout. Our team replies within 24 hours.
Full Specification
- ModelFAME-RB-914MG (RB914 series)
- Overall size914 W x 559 D x 876 H mm (36 x 22 x 34.5 in), floor-standing
- Carcass16 mm MFC, E1 to EN 717-1 and TSCA Title VI (40 CFR 770), melamine-faced both sides
- Fronts18 mm MDF core, mushroom gray super-matte melamine at 4 gloss units, recessed 120 mm aluminum finger pull, no drilled handle holes
- Edgebanding1 mm ABS on all four edges, PUR glue line
- Drawers2 full-extension undermount, soft-close, 25 kg rated, 40,000-cycle tested
- TopOne-piece cast resin, matte white gel coat, 25 mm slab with 12 mm apron, 480 x 330 x 130 mm bowl
- Faucet drillingOne 35 mm hole centered 55 mm off the back edge; 3-hole at 200 mm centers from 100 sets
- Overflow / waste32 mm overflow outlet, 45 mm waste opening; waste and trap not included
- FinishMushroom gray super-matte melamine carcass and fronts, matte white top; ADA variant at 826 mm deck
- Packaging2 cartons per set: cabinet flat-pack 990 x 640 x 230 mm, top in EPS cradle 980 x 640 x 280 mm
- Volume / weight0.321 m3 per set, 35 kg gross (24 kg cabinet, 11 kg top)
- Loading210 sets per 40HQ at 68 m3 usable, 85 sets per 20GP
- MOQ20 sets per model per finish; mixed finishes from 60 sets
- Lead time / port30-35 days after deposit and finish approval; FOB Ningbo, CIF Los Angeles and Long Beach on request
Why Buyers Choose This Model
- 914 mm (36 in) wide and 559 mm (22 in) deep at 876 mm (34.5 in) deck height — the footprint that replaces a 36 in cultured-marble unit without moving the DWV rough-in
- One-piece cast-resin top with the 480 x 330 x 130 mm bowl molded in: no rim joint, no separate top SKU, and no silicone line to fail first in a rental turnover
- 16 mm MFC carcass and 18 mm MDF fronts, TSCA Title VI (40 CFR Part 770) panel lot file issued with every order, not on request
- Two full-extension undermount drawers, soft-close, 25 kg rated and 40,000-cycle tested — no friction roller in the unit
- 0.321 m3 per set in two cartons: 210 sets per 40HQ at 68 m3 usable, 85 sets per 20GP
- Split packing on purpose — cabinet flat-pack at 0.146 m3 and the top in an EPS cradle at 0.176 m3, so a cracked top is a 0.176 m3 reorder instead of a whole-unit write-off
- ADA deck height variant at 826 mm (32.5 in) on the same carcass, inside the 34 in maximum in the 2010 ADA Standards section 604.4
- Cartons printed with your PO, model code and a QR to the installation sheet; mixed finishes from 60 sets with one physical color chip per finish
Specification Questions Buyers Ask
Why ship the top in its own carton instead of one crate per vanity?
Because the top is the part that breaks and the cabinet is the part that does not. In one crate, a cracked top scraps a whole unit and you hold a cabinet with no top. Split into a 0.146 m3 cabinet carton and a 0.176 m3 top carton, the same damage becomes a top reorder, and your installer can pair any RB914 top with any RB914 cabinet in stock. The volume cost is small: 0.321 m3 total either way, and it is what allows 210 sets on a 40HQ.
Is cast resin better than cultured marble for a rental?
They are close cousins - both are Cast Polymer Alliance materials - and the difference that matters on turnover is the molded bowl rather than the chemistry. A cultured-marble top with a separate pressed bowl has a rim joint that takes the first hit from a dropped hairdryer. A one-piece cast top has no rim joint at all, so there is nothing to re-caulk between tenants. Where cast resin loses is heat: a hot curling iron left on the surface will mark it, so put a note in the turnover checklist rather than assume the top is indestructible.
Does a 36 in vanity fit a 36 in alcove once the drywall is finished?
Plan the finished opening at 37 to 37.5 in (940 to 953 mm). The carcass is exactly 914 mm at the box, so a true 36 in opening leaves no room for the leg shims or a caulk line. If the alcove is fixed at 914 mm, take the 34 in (864 mm) top and cabinet from the same series instead of trimming the carcass, because trimming a melamine panel exposes core and voids the panel file.
What formaldehyde documentation comes with a US order?
The 16 mm MFC and the 18 mm MDF are both produced to TSCA Title VI (40 CFR Part 770), which is the federal rule that carries CARB ATCM Phase 2 into the whole US market. Every order ships with the panel lot number, the mill's TSCA Title VI statement, and the emission test report for the lot used. If your retailer wants the laminated product label wording checked before the container leaves, send the label and we confirm it against the panel lot rather than against last season's file.
Can the faucet hole be drilled for a widespread set?
Standard is one 35 mm hole. A 3-hole drilling at 200 mm centers is available from 100 sets with no tooling charge, and from 20 sets with a setup fee. Send the faucet drawing with the PO, because the spout reach decides whether the hole sits at 55 mm or further back, and a hole drilled for the wrong reach puts the spout over the bowl edge.
Building a Basins Program?
Send your target market, sizes and quantities — we reply within 24 hours with a tailored quotation.