900 mm Eucalypt Grey Melamine Vanity - E0 Board, Cabinet-Only Option

900 mm wide on 18 mm E0 board, with a cabinet-only SKU so the WaterMark question stays on the basin and the tap instead of on the box.

Most 900 mm wall-hung vanities sold into Australian project work are 16 mm board with a foil face and a basin that arrives without a WaterMark licence, and both problems surface after the tiler has finished. MM900 is quoted the other way round: an 18 mm E0 carcass to AS/NZS 1859.1 with 1 mm ABS banding on every edge, eucalypt grey super-matte fronts at 4 gloss units, and a one-piece vitreous china top at 900 x 460 mm. It can ship as cabinet only, so a merchant pairs it with a basin and mixer already certified for the Australian market. Two 25 kg drawers, one door, 0.386 m3 per carton, 160 sets per 40HQ.

  • ModelFAME-MM-900EG (MM900 series)
  • Overall size900 W x 460 D x 840 H mm (cabinet 660 mm + basin 180 mm), wall hung; top edge 850 mm from finished floor, rail set allows 800-900 mm
  • Carcass18 mm E0 HMR MFC to AS/NZS 1859.1, melamine faced both sides, 1 mm ABS edging on all edges
  • Fronts18 mm E0 board, eucalypt grey super-matte melamine at 4 gloss units, slab, 3 mm shadow gap, pulls pre-fitted
  • ConfigurationLeft 450 mm door with one adjustable shelf; right 450 mm two-drawer bank
  • Drawers2 concealed runners, soft close, full extension, 25 kg rated per drawer, 40,000-cycle tested

Trade inquiry only — this is a B2B catalog with no online checkout. Our team replies within 24 hours.

Full Specification

  • ModelFAME-MM-900EG (MM900 series)
  • Overall size900 W x 460 D x 840 H mm (cabinet 660 mm + basin 180 mm), wall hung; top edge 850 mm from finished floor, rail set allows 800-900 mm
  • Carcass18 mm E0 HMR MFC to AS/NZS 1859.1, melamine faced both sides, 1 mm ABS edging on all edges
  • Fronts18 mm E0 board, eucalypt grey super-matte melamine at 4 gloss units, slab, 3 mm shadow gap, pulls pre-fitted
  • ConfigurationLeft 450 mm door with one adjustable shelf; right 450 mm two-drawer bank
  • Drawers2 concealed runners, soft close, full extension, 25 kg rated per drawer, 40,000-cycle tested
  • HingesHettich Sensys 110 degree soft close, clip-on, 3-way adjustment
  • BasinOne-piece vitreous china, 900 x 460 mm, 15 mm rim, overflow, 32 mm waste outlet; waste and trap not included
  • Tap drilling1 x 35 mm as standard; no tap hole from 50 sets for wall-mounted mixers
  • Wall fixingSteel rail 800 mm plus cam brackets, 2 anchors per stud bay or 4 masonry anchors (not supplied), template in carton 1
  • Packaging1 set per carton, 950 x 580 x 700 mm, EPS corner blocks, 5-layer corrugated, rail in a separate sleeve
  • Volume / weight0.386 m3 per carton, 38 kg gross (22 kg cabinet, 16 kg basin)
  • Loading160 sets per 40HQ at 62 m3 usable, 64 sets per 20GP
  • MOQ / lead time20 sets per model per finish, 3 finishes mixable from 60 sets; 30-35 days after deposit and finish approval
  • Port / termsFOB Ningbo or Shanghai; CIF Sydney, Melbourne and Brisbane quoted on request

Why Buyers Choose This Model

  • 900 W x 460 D x 840 H mm wall hung (660 mm cabinet plus a 180 mm basin), so it lands on the standard 900 mm vanity footprint a project drawing already uses
  • 18 mm E0 HMR carcass to AS/NZS 1859.1 with melamine on both faces and 1 mm ABS banding on all edges - a board class a specifier can check against a report, not the phrase 'moisture resistant'
  • Cabinet-only SKU ships without basin, waste or tap, keeping the WaterMark licence with the merchant's stocked range and taking 16 kg out of the 38 kg carton
  • Eucalypt grey super-matte melamine at 4 gloss units on 18 mm fronts, 3 mm shadow gap, brushed nickel 160 mm bar pulls pre-fitted at the factory so nothing is drilled on site
  • Right-hand two-drawer bank on 25 kg concealed soft-close runners, full extension, 40,000-cycle tested; left-hand 450 mm door on Hettich Sensys 110 degree soft-close hinges
  • One-piece vitreous china top at 900 x 460 mm with a 15 mm rim, overflow and a 32 mm waste outlet; no tap hole from 50 sets for wall-mounted mixers
  • 0.386 m3 per carton and 160 sets per 40HQ at 62 m3 usable, 64 sets per 20GP - a full container of one model without a mixed-load negotiation
  • Steel hanging rail, cam brackets and a paper template in carton 1: two anchor points per stud bay, or four masonry anchors into brick veneer, on the wall in under 20 minutes

Specification Questions Buyers Ask

What board class does an Australian project actually ask for?
The specification is written by class and by standard, so quote the number: 18 mm E0 to AS/NZS 1859.1 with a test report against the panel. E1 is the baseline legal grade under the same series, at 1.5 mg/L on the desiccator method, and E0 is the industry class at 0.5 mg/L. A statement saying 'moisture resistant board' answers none of that, and it is the first thing a certifier asks you to replace with a report.
Why would I ship a vanity without a basin or a tap?
Because the cabinet is furniture and the basin, waste and mixer are plumbing products, and the Plumbing Code of Australia requires the plumbing products to hold WaterMark certification. When the basin ships with the cabinet, the importer carries a certification question on a product whose licence sits with someone else. Cabinet-only keeps the box simple, and a merchant who already ranges a certified basin and mixer loses nothing.
Will 900 mm fit a 900 mm alcove?
Plan the finished opening, not the cabinet. The carcass is exactly 900 mm, so a tiled alcove needs 910-920 mm to take the rail brackets and give a clean silicone line. If the opening is fixed at 900 mm, take the 800 mm model in the same series rather than trimming an edge-banded panel, which voids the moisture protection at the cut.
How does a wall-hung vanity fix to Australian wall types?
Timber-framed walls at 450 or 600 mm stud spacing take the rail with two masonry-style anchors per stud. Brick veneer needs the anchors to pass the plasterboard and the cavity and land in the brick, which means a longer fixing and a pilot hole through the board first. Double brick is the easiest case. Plasterboard alone, with no stud and no brick behind, will not carry a 38 kg cabinet plus contents.
What is in the documentation pack with the container?
The panel class report for the board, the edge banding specification, the hinge and runner cycle-rating sheets, a measured carton dimension and weight list keyed to the model code on the packing list, and a packing declaration for the timber packaging. Ask for the board report at order stage rather than at clearance, because a reissued report is a two-week delay on a project handover.

Building a Bathroom Cabinets Program?

Send your target market, sizes and quantities — we reply within 24 hours with a tailored quotation.

Start Your Inquiry