Clay Grey L-Shaped Kitchen - 2,700 mm Flat-Pack Corner Run
A corner kitchen that arrives as eleven cartons: one blind corner base with a carousel, a drawer bank and a sink base, clay grey matte fronts, and hardware a fitter assembles without cutting a panel on site.

A straight run is easy to sell and hard to fit once the room turns a corner, and the corner is where a flat-pack program usually loses money: a made-to-measure return, a panel cut on site, an unsealed edge in a wet room. KC27 is the corner answered with modules instead of joinery. Two 1,800 mm walls share one 900 x 900 blind corner base, and the dead corner is recovered with a two-tier carousel on a steel pivot. Clay grey matte fronts, 18 mm E1 moisture-resistant carcass, 1 mm ABS edges, cam and dowel with 32 mm system holes. It leaves the factory as eleven cartons at 0.86 m3 and 132 kg gross, and 78 runs fit a 40HQ on cube.
- ModelFAME-KC-27CG (KC27 series)
- Frontage2,700 mm on an L: 1,800 mm long wall + 1,800 mm return wall sharing one 900 x 900 corner
- Base modules900 blind corner base, 900 three-drawer base, 900 two-door sink base with dummy front; all 550 D x 720 H
- Wall modules900 corner wall with carousel plus 2 x 900 wall units; 320 D x 720 H, adjustable feet 100-150 mm
- Carcass18 mm E1 moisture-resistant board to EN 717-2, melamine faced both sides, sealed back edge, 1 mm ABS on all exposed edges (hot-melt glued, radiused; PVC-free on request)
- Fronts / finish18 mm E1 board, clay grey matte melamine at 4 gloss units, slab profile, 3 mm shadow gap
Trade inquiry only — this is a B2B catalog with no online checkout. Our team replies within 24 hours.
Full Specification
- ModelFAME-KC-27CG (KC27 series)
- Frontage2,700 mm on an L: 1,800 mm long wall + 1,800 mm return wall sharing one 900 x 900 corner
- Base modules900 blind corner base, 900 three-drawer base, 900 two-door sink base with dummy front; all 550 D x 720 H
- Wall modules900 corner wall with carousel plus 2 x 900 wall units; 320 D x 720 H, adjustable feet 100-150 mm
- Carcass18 mm E1 moisture-resistant board to EN 717-2, melamine faced both sides, sealed back edge, 1 mm ABS on all exposed edges (hot-melt glued, radiused; PVC-free on request)
- Fronts / finish18 mm E1 board, clay grey matte melamine at 4 gloss units, slab profile, 3 mm shadow gap
- JoineryCam and dowel with pre-inserted nylon dowels, 32 mm system holes at 32 mm pitch, 5 mm HDF back panel in a groove
- HingesHettich Sensys 110 degree soft close, clip-on, 3-way adjustment, 50,000-cycle rated
- Drawers30 kg concealed runners, soft close, full extension; 900 mm three-drawer bank with 16 mm drawer boxes
- Corner900 blind corner base with a two-tier kidney carousel on a steel pivot, 15 kg per tier, height adjustable
- WorktopNot included; 28 mm laminate and 12 mm compact tops quoted separately against the same run
- Packaging11 cartons per run, 5-layer corrugated, 15 mm foam corners, hardware in a labeled box inside carton 1, assembly drawing included
- Volume / weight0.86 m3 per run, 132 kg gross (126 kg net), 153 kg per m3; largest carton 1,850 x 620 x 120 mm
- Loading / MOQ78 runs per 40HQ at 68 m3 usable, 32 runs per 20GP; MOQ 20 runs per model per finish, 3 finishes mixable from 60; 30-35 days after deposit and finish approval
- Port / termsFOB Ningbo or Shanghai; CIF Le Havre and Marseille-Fos quoted on request, with THC and ISPS shown separately on the freight line
Why Buyers Choose This Model
- 2,700 mm of frontage on an L: 1,800 mm long wall plus 1,800 mm return sharing one 900 x 900 corner, so the room is filled with modules instead of a cut panel and a made-to-measure return
- 18 mm E1 moisture-resistant board to EN 717-2, melamine on both faces with a sealed back edge and 1 mm ABS on every exposed edge - the specification that survives a kitchen at 80 percent relative humidity
- Clay grey matte melamine at 4 gloss units on handle-less slab fronts with a 3 mm shadow gap, so nothing is drilled or routed on site and a replacement door still aligns two years later
- Cam and dowel joinery with pre-inserted nylon dowels and 32 mm system holes at 32 mm pitch, which turns assembly into a cordless drill, a number 2 square bit and a 4 mm hex key
- 900 mm blind corner base with a two-tier kidney carousel on a steel pivot rated 15 kg per tier, recovering the 900 x 900 dead corner a flat-pack L normally writes off
- Hettich Sensys 110 degree soft-close hinges rated 50,000 cycles with 3-way adjustment, and 30 kg full-extension soft-close runners on the three-drawer bank with 16 mm drawer boxes
- 11 cartons per run at 0.86 m3 and 132 kg gross - 78 runs per 40HQ at 68 m3 usable and 32 per 20GP, filling on cube at roughly 10.3 t against a payload above 26 t
- No solid wood anywhere in the pack, so no ISPM 15 mark and no fumigation queue, and nothing on the packing list that a French importer has to declare as solid wood packaging
Specification Questions Buyers Ask
What does 2,700 mm on an L actually deliver, module by module?
Why a carousel in the corner instead of an open blind corner?
Is 18 mm E1 board acceptable in a French kitchen, and what does the labeling require?
How many runs fit, and what mix works alongside a mirror cabinet line?
What spare parts and documents should land with the first container?
Building a Kitchen Cabinets Program?
Send your target market, sizes and quantities — we reply within 24 hours with a tailored quotation.
