Terracotta Clay Flat-Pack Kitchen - 3 m Run, 18 mm P3 Board

A ten-module 3 m run that leaves the factory as nine cartons: 18 mm P3 carcass at E1, terracotta clay fronts at 4 gloss units, and hardware that a fitter can assemble without a second trip to site.

Terracotta has moved from tile to cabinetry, and the buyers asking for it are not asking for a painted finish - they are asking for a melamine they can flat-pack, ship and assemble without a spray booth. KC72 is a ten-module 3 m run in terracotta clay super-matte melamine at 4 gloss units on an 18 mm E1 P3 carcass, 1 mm ABS edging, cam and dowel joints with pre-inserted nylon dowels, Hettich soft-close hinges and 25 kg full-extension runners. It leaves the factory as nine cartons, 0.74 m3 and 118 kg per run. Eighty-eight runs fit a 40HQ.

  • ModelFAME-KC-TC72 (KC72 series)
  • Run size3,000 mm finished: 4 x 600 base, 3 x 600 wall, 1 x 600 tall pantry, 2 x 50 filler, 3,000 mm plinth
  • Carcass18 mm EN 312 P3 particleboard, E1 to EN 717-2, melamine faced both sides
  • Fronts18 mm P3 board, terracotta clay super-matte melamine at 4 gloss units, slab, 3 mm shadow gap
  • Edging1 mm ABS on all exposed edges, hot-melt glued, trimmed and radiused
  • JoineryCam and dowel with pre-inserted nylon dowels, 32 mm system holes at 32 mm pitch, back panel 5 mm HDF in a groove

Trade inquiry only — this is a B2B catalog with no online checkout. Our team replies within 24 hours.

Full Specification

  • ModelFAME-KC-TC72 (KC72 series)
  • Run size3,000 mm finished: 4 x 600 base, 3 x 600 wall, 1 x 600 tall pantry, 2 x 50 filler, 3,000 mm plinth
  • Carcass18 mm EN 312 P3 particleboard, E1 to EN 717-2, melamine faced both sides
  • Fronts18 mm P3 board, terracotta clay super-matte melamine at 4 gloss units, slab, 3 mm shadow gap
  • Edging1 mm ABS on all exposed edges, hot-melt glued, trimmed and radiused
  • JoineryCam and dowel with pre-inserted nylon dowels, 32 mm system holes at 32 mm pitch, back panel 5 mm HDF in a groove
  • HingesHettich Sensys 110 degree soft close, clip-on, 3-way adjustment, 50,000-cycle rated
  • Drawers25 kg concealed runners, soft close, full extension; 600 mm three-drawer bank with 16 mm drawer boxes
  • Module sizesBase 600 W x 560 D x 720 H; wall 600 W x 320 D x 720 H; tall 600 W x 560 D x 2,100 H; adjustable feet 100-150 mm
  • WorktopNot included; 28 mm or 38 mm laminate and compact tops quoted separately against the same run
  • Packaging9 cartons per run, 5-layer corrugated, 15 mm foam corners, hardware in a labelled box inside carton 1, assembly drawing included
  • Volume / weight0.74 m3 per run, 118 kg gross (112 kg net); largest carton 2,050 x 620 x 120 mm
  • Loading88 runs per 40HQ at 68 m3 usable, 36 runs per 20GP
  • MOQ / lead time20 sets per model per finish - one 3 m run per set, equal to the 20 pcs per model MOQ; 3 finishes mixable from 60 sets; 30-35 days after deposit and finish approval
  • Port / termsFOB Ningbo or Shanghai; CIF San Antonio and Valparaiso quoted on request

Why Buyers Choose This Model

  • Ten modules across 3,000 mm: four 600 mm base units (one as a three-drawer bank), three 600 mm wall units, one 600 mm tall pantry, two 50 mm fillers and a 3 m plinth - a run that reaches the wall without a site cut
  • 18 mm EN 312 P3 carcass at E1 (EN 717-2 chamber method), melamine faced both sides, so the board class is a document a distributor can hand to a project specifier instead of an adjective
  • 1 mm ABS edging on every exposed edge, hot-melt glued and trimmed, on a board where a 0.4 mm edge is the first thing to lift in a humid kitchen
  • Terracotta clay super-matte melamine fronts at 4 gloss units, slab profile with a 3 mm shadow gap - no five-piece frame, no paint line, no spray booth in the assembly country
  • Cam and dowel assembly with pre-inserted nylon dowels and 32 mm system holes at 32 mm pitch, so a fitter drills nothing and a replacement door from stock still lines up two years later
  • Hettich Sensys 110 degree soft-close hinges with 3-way adjustment, and 25 kg concealed full-extension soft-close runners on the drawer bank, both rated 50,000 cycles
  • Nine cartons per run, 0.74 m3 and 118 kg gross - 159 kg per m3, so a 40HQ fills on cube at 88 runs and 10.4 t, comfortably inside the payload limit
  • 88 runs per 40HQ at 68 m3 usable and 36 per 20GP, with no solid wood anywhere in the pack, so no ISPM 15 mark and no fumigation delay at the port

Specification Questions Buyers Ask

Why ship flat instead of assembled?
Because assembled kitchens pay for air. A 3 m run assembled is roughly 3.2 m3 and cannot be nested; the same run flat is 0.74 m3 in nine cartons and stacks against other cartons. On a 40HQ that is the difference between 25 runs and 88 runs, and it also means a damaged door is a carton replacement rather than a whole-unit claim. The trade-off is assembly labour at destination, which is about four to six hours for a two-person team on this run with a cordless drill and the supplied drawing.
Is E1 enough, or does the market want E0 or CARB?
E1 is the class almost every Latin American and European project specification is written against, and it is what the EN 717-2 test report in the documentation pack evidences. E0 and CARB Phase 2 exist and we can quote them, but they add cost and lead time, and asking for them without a specifier who named them just moves the price up. State the class and the standard in the purchase order - 'E1 to EN 717-2' - rather than the word 'low emission'.
How long does assembly actually take on site?
Four to six hours for the ten modules with two people: carcasses first, then the wall units on the supplied brackets, then doors and drawer fronts, then the plinth and fillers. The only tools needed are a cordless drill, a number 2 square driver bit, a 4 mm hex key and a spirit level. Nothing is drilled on site because the system holes and hinge plates are pre-machined, which is also what keeps the door alignment repeatable.
Can kitchens and mirror cabinets share a container?
Yes, and the arithmetic is cube, not weight. Both families run at about 159 kg per m3, so a 40HQ fills at roughly 68 m3 and 10 to 11 t, well inside a payload that is over 26 t. A mixed load is therefore an allocation decision: 40 runs at 0.74 m3 plus 270 mirror cabinets at 0.139 m3 fills 67 m3 and lands near 10.6 t. Split it against what the distributor can actually sell in the first quarter, not against tonnage. Keep the mirror cartons upright and never underneath kitchen cartons, and load them at the door end so they come out first.
What spare parts should ship with the container?
Two percent of hinges and runners, one spare door and one spare drawer front per 20 runs, and a bag of cam locks and dowels. Hinges and runners are the parts that fail, doors are the parts that arrive damaged, and neither is worth an air freight shipment six months into a program. Ask for them on the packing list as a separate line so they are not written off as samples at customs.

Building a Kitchen Cabinets Program?

Send your target market, sizes and quantities — we reply within 24 hours with a tailored quotation.

Start Your Inquiry