800 mm Anthracite Aluminum Vanity - Wall Hung, No Core to Swell

800 mm wide, 460 mm deep, and the carcass is aluminum honeycomb rather than board, so the shower wall is not the failure point.

Most 800 mm wall-hung units sold into UK refurbishment are 16 mm chipboard with a foil face, and a bathroom whose extractor never runs will find the weakness within two winters. AL800 has no core to find: a 0.9 mm 3003 aluminum honeycomb carcass with an anodized anthracite frame, powder-coated on both faces and sealed at every edge, so a splash sits on the surface instead of in the board. Two drawers run on 25 kg concealed soft-close runners behind a recessed aluminum pull, and the top is a one-piece vitreous china basin at 800 x 460 mm with a single 35 mm tap hole. One carton, 0.315 m3, 196 sets per 40HQ.

  • ModelFAME-AL-800AG (AL800 series)
  • Overall size800 W x 460 D x 800 H mm (cabinet 620 mm + basin 180 mm), wall hung
  • Mounting heightTop edge at 850 mm from finished floor as standard; rail set allows 800-900 mm
  • Carcass0.9 mm 3003 aluminum honeycomb panel, anodized frame, powder-coated both faces, edges sealed
  • Drawers2 full-extension concealed runners, soft-close, 25 kg rated per drawer, 40,000-cycle tested
  • BasinOne-piece vitreous china, 800 x 460 mm, 180 mm depth, overflow, 45 mm waste opening; waste and trap not included

Trade inquiry only — this is a B2B catalog with no online checkout. Our team replies within 24 hours.

Full Specification

  • ModelFAME-AL-800AG (AL800 series)
  • Overall size800 W x 460 D x 800 H mm (cabinet 620 mm + basin 180 mm), wall hung
  • Mounting heightTop edge at 850 mm from finished floor as standard; rail set allows 800-900 mm
  • Carcass0.9 mm 3003 aluminum honeycomb panel, anodized frame, powder-coated both faces, edges sealed
  • Drawers2 full-extension concealed runners, soft-close, 25 kg rated per drawer, 40,000-cycle tested
  • BasinOne-piece vitreous china, 800 x 460 mm, 180 mm depth, overflow, 45 mm waste opening; waste and trap not included
  • Tap drilling1 x 35 mm as standard; 3-hole at 180 mm centers from 100 sets
  • FinishAnthracite grey anodized frame, 60-80 micron powder coat, 480 h NSS to ASTM B117
  • InteriorOne adjustable aluminum shelf, 12 kg per shelf, full-height drawer boxes with 15 mm bottoms
  • Wall fixingSteel rail plus cam brackets, 700 mm rail, 2 anchor points per stud bay or 4 masonry anchors (not supplied)
  • Packaging1 set per carton, 880 x 560 x 640 mm, EPS corner blocks, 5-layer corrugated, rail in a separate sleeve
  • Volume / weight0.315 m3 per carton, 34 kg gross (18 kg cabinet, 16 kg basin)
  • Loading196 sets per 40HQ at 62 m3 usable, 78 sets per 20GP
  • MOQ / lead time20 sets per model per finish, mixed finishes from 60 sets; 30-35 days after deposit and finish approval
  • Port / termsFOB Ningbo or Shanghai; CIF Felixstowe and Southampton quoted on request

Why Buyers Choose This Model

  • 800 mm wide and 460 mm deep with a 620 mm cabinet body: fits the 800 mm niche beside a 900 mm door swing in a UK terrace bathroom without a made-to-measure filler
  • 0.9 mm 3003 aluminum honeycomb carcass, anodized frame, powder-coated both faces with sealed edges - there is no particleboard core to take up water at the shower line
  • Anthracite powder coat at 60-80 microns, 480 h neutral salt spray to ASTM B117, no blistering at the cut edge - the finish a coastal or hard-water postcode needs
  • Two full-extension concealed runners, soft-close, 25 kg rated per drawer and 40,000-cycle tested, behind a 120 mm recessed aluminum pull with no drilled hole
  • One-piece vitreous china basin at 800 x 460 mm with overflow and one 35 mm tap hole: no silicone joint between top and cabinet, and a WRAS-approved mixer drops straight in
  • 0.315 m3 per carton and 196 sets per 40HQ at 62 m3 usable, 78 sets per 20GP - a full container of 800 mm units without a mixed-model negotiation
  • Steel hanging rail plus cam brackets with a paper template in carton 1: two anchor points per stud bay or four masonry anchors, on site in under 20 minutes
  • Spare runner pair, shelf pins and a touch-up paint pen ship with every 40HQ, so a dealer holds after-sales stock without a separate parts order

Specification Questions Buyers Ask

Why aluminum instead of moisture-resistant board for a UK bathroom?
Because MR board only resists water until an edge is cut or a fixing hole is drilled, and a vanity has both by the time it is hung. Aluminum honeycomb has no core to absorb water, so the unit does not fail at the door line or around the rail bolts two winters after install. The trade-off is unit cost and a slightly different feel in the hand, which is why this carcass is quoted for rental portfolios, serviced accommodation and housing-association refits rather than the entry shelf of a retail range.
Will an 800 mm vanity fit an 800 mm gap once the tiles are on?
Plan the finished opening, not the unit. The carcass is exactly 800 mm wide, so a tiled opening needs 810-820 mm to take the rail brackets and leave a clean silicone line. If the alcove is fixed at 800 mm, take the 750 mm version of the same series rather than trimming the aluminum frame, which we will not warranty.
Can the unit hang on a dot-and-dab plasterboard wall?
Not on the plasterboard alone. Dot-and-dab over masonry is fine if the anchors reach the block or brick behind the adhesive dabs, which means longer masonry fixings and a pilot hole through the board first. On a stud partition, either land both rail brackets on studs or fit a ply pattress behind the board before tiling. A 34 kg unit plus 15 kg of towels and bottles is not a plasterboard plug job.
Do I need a WRAS-approved mixer to sell this in the UK?
If you ship the mixer with the vanity, yes - the tap and any flexible connectors are water fittings under the Water Supply (Water Fittings) Regulations 1999 and need approval. The cabinet itself is furniture and is not a water fitting. Shipping the vanity without a tap keeps the compliance question with your own tap supplier, which most merchants prefer because they already stock a WRAS-listed range.
What documentation comes with the container?
The aluminum alloy and panel thickness certificate, the powder coat film thickness and salt spray report, the runner cycle-rating sheet, and a carton dimension and weight list keyed to the model code on the packing list. An EN 14749:2016+A1:2022 test report for the assembled unit is available on request where an insurer or a housing association asks for one.

Building a Bathroom Cabinets Program?

Send your target market, sizes and quantities — we reply within 24 hours with a tailored quotation.

Start Your Inquiry