600 mm Harbor Blue Aluminum Vanity — Compact Wall-Hung Unit for Narrow Bathrooms
600 mm wide, 460 mm deep, aluminum the whole way through — a wet-room unit that fits where a 700 mm vanity will not.
Most 600 mm vanities sold in Europe are 16 mm board with a melamine face, and in a guest bathroom with no window they last about as long as the silicone around them. This one is built the other way round: a 0.9 mm honeycomb aluminum carcass, powder-coated harbor blue on both faces and sealed at every edge, so there is no core to take up water. The single door runs on a DTC soft-close hinge rated for 50,000 cycles behind a recessed aluminum pull, and the top is a one-piece vitreous china basin at 600 x 460 mm with one 35 mm tap hole. One carton per piece at 0.258 m3, 240 pieces per 40HQ.
- ModelFAME-AL-600CS (AL600 series)
- Overall size600 W x 460 D x 830 H mm (cabinet 650 mm + basin 180 mm)
- Carcass0.9 mm 3003 aluminum honeycomb panel, powder-coated both faces, sealed edges
- Door1 door on an 18 mm aluminum frame with a recessed pull, no drilled knob hole
- HingeDTC 110 deg soft-close, clip-on, 3-way adjustment, 50,000-cycle rated
- BasinOne-piece vitreous china bench basin, 600 x 460 mm, overflow, 35 mm tap hole
Trade inquiry only — this is a B2B catalog with no online checkout. Our team replies within 24 hours.
Full Specification
- ModelFAME-AL-600CS (AL600 series)
- Overall size600 W x 460 D x 830 H mm (cabinet 650 mm + basin 180 mm)
- Carcass0.9 mm 3003 aluminum honeycomb panel, powder-coated both faces, sealed edges
- Door1 door on an 18 mm aluminum frame with a recessed pull, no drilled knob hole
- HingeDTC 110 deg soft-close, clip-on, 3-way adjustment, 50,000-cycle rated
- BasinOne-piece vitreous china bench basin, 600 x 460 mm, overflow, 35 mm tap hole
- FinishHarbor blue matte powder coat, 60-80 micron film, 480 h NSS to ASTM B117
- Interior1 adjustable shelf on aluminum pins, 12 kg per shelf
- Wall fixingSteel rail plus cam brackets, 600 mm rail, 2 anchor points per stud bay
- Packaging1 pc per carton, 670 x 550 x 700 mm, EPS corner blocks, 5-layer corrugated
- Volume / weight0.258 m3 per carton, 19.5 kg gross
- Loading240 pcs per 40HQ (62 m3 usable), 96 pcs per 20GP
- MOQ20 pcs per model, mixed finishes allowed from 60 pcs
- Lead time30-35 days after deposit and finish approval
- Port / termsFOB Ningbo or Shanghai; CIF Hamburg and Bremerhaven quoted on request
Why Buyers Choose This Model
- 600 mm wide and 460 mm deep — fits the 600 mm niche in a German guest bathroom or student-housing plan without blocking a 900 mm door swing
- 0.9 mm 3003 honeycomb aluminum carcass, powder-coated both faces with sealed edges, so there is no particleboard core to swell at the shower line
- Harbor blue matte powder coat at 60-80 microns, neutral salt spray 480 h to ASTM B117 with no blistering at the cut edge
- DTC 110 deg soft-close hinge, clip-on, 3-way adjustment, rated 50,000 cycles with a 12 kg door
- One-piece vitreous china bench basin 600 x 460 mm with overflow and a single 35 mm tap hole — no silicone joint between top and cabinet
- 0.258 m3 per carton and 240 pcs per 40HQ, which is 70 more pieces per container than a 700 mm unit of the same family
- Pre-drilled cam rail and a paper mounting template in carton 1: one installer hangs it in under 15 minutes with a 600 mm rail
- Spare hinge, shelf pin and touch-up paint pack shipped with every 40HQ for dealer after-sales stock
Specification Questions Buyers Ask
Is a powder-coated aluminum carcass worth the premium over HMR board?
In a room that gets steamed every day, yes. HMR board only resists moisture until an edge is cut or a fixing hole is drilled, and a vanity has both. Aluminum has no core to absorb water, so the unit does not fail at the door line two winters after install. The trade-off is unit cost, roughly a step up from board, which is why we quote this carcass for hotels, student housing and rental portfolios rather than for the lowest shelf of the retail market.
Will a 600 mm vanity fit a 600 mm opening once the tiles are on?
No, plan the opening, not the unit. The cabinet is exactly 600 mm wide at the carcass, so the finished tiled opening needs 610 to 620 mm to allow the rail brackets and a clean silicone line. If your opening is fixed at 600 mm, take the 550 mm version of the same series instead of trimming the aluminum frame, which we do not recommend.
Can I mix harbor blue with another finish in one container?
Yes, from 60 pcs total. Below that we run a single finish per batch, because a powder color change means a full line purge and that cost lands on the small order. Mixed-finish shipments go out with one physical color card per finish for your dealer network.
Can the basin be drilled for a three-hole tap?
The standard top ships with one 35 mm tap hole. A three-hole drilling at 35 mm centers is available from 100 pcs per order at no tooling charge, and from 20 pcs with a small setup fee. Send the tap drawing with the PO, because the spout reach decides the hole position relative to the basin edge.
What documentation arrives with the container?
The aluminum alloy and panel thickness certificate, the powder coat film thickness and salt spray report, the hinge cycle rating sheet, and a carton dimension and weight list keyed to the model code on the packing list. An EN 14749:2016+A1:2022 test report for the assembled unit is available on request if the project needs one for an insurer or a housing association.
Building a Bathroom Cabinets Program?
Send your target market, sizes and quantities — we reply within 24 hours with a tailored quotation.